Maintenance and repairs are easy with the correct information.  Get the book!

Maintenance and repairs are easy with the correct information.  So don’t get all choked up while we look at the choke circuit!

CHOKE CIRCUIT.

a. Function. These carburetors employ a manual type choker illustrated in the figure above. When the choker is used, the mixture is enriched by cutting down the amount of air admitted through the carburetor. These carburetors use a choker valve with a semi-automatic feature, the choker is connected to the operating lever by a soft spring, the choker valve is also mounted off-center in the air horn. The incoming air tends to push the choker valve open (the longer section of the choker valve being on the lower side of the choker shaft), and the spring action tends to hold choker valve closed. Thus the. valve is allowed to “breathe” with the engine, which tends to lessen the sensitivity of the choker control. In addition to this feature, a poppet valve is provided in the valve to allow inward relief and hence lessen the danger of over-choking when the engine starts to run. The choker and throttle levers are connected by the choker link, which opens the throttle slightly during the choking period.

Find out more about the WW2 jeep in – The Complete WW2 Military Jeep Manual

Advertisements