Using tools safely

Never use a wrench which fits the nut poorly. This practice batters nuts and spreads wrenches. Use correct size wrench.

 

Using a vacuum gage to diagnose WW2 jeep engine problems?

 

Army Jill pauses by the 42 Ford GPW

The vacuum gage can tell you much more then a simple compression check.

See How to Master the Vacuum Gage

You may not have a port on an early manifold. Army Motors told the troops to drill a hole or the vacuum part. And I reckon to tap it for a plug as well. As an alternative you could fashion a spacer with a vacuum port for those jeeps that don’t have a port…and when you don’t want to drill a port.

 

What’s a good tool list for WW2?

If you have my book “Military Maintenance” (available from lulu.com and most major bookstore chains) it provides a description of what is in Standard Nomenclature List (SNL) G-27.  “Ordnance shops will get most of their information from SNL G-27, including the basis of issue for special tools.  Basis of issue for unit equipment sets of 3rd and 4th-echelon tools is contained in the organization’s T/O&E, but details of the sets are published in G-27.  In addition you can find pictures of special tools in SNL G-175.”

More on the subject?

“Organizational Spare Parts and Equipment (OSPE).  These are individual pamphlets for each make and model vehicle.  They tell what tools the vehicle itself carries (first-echelon tools), and what special tools the second echelon will need to maintain it.  OSPE’s are used as a basis of issue.”

“Tool Sets, Motor Transport (SNL N-19).  This one has a tool-by-tool listing, with pictures, of everything in the second-echelon unit equipment sets (including the Armored Command sets), plus the hand-tool kits of general automotive mechanics and automotive specialists.  It’s good only for identifying the tools in the sets; the basis for requisitioning sets is company’s T/O&E.”

BANTAM, FORD AND WILLYS—1/4-TON RECONNAISSANCE CARS

By Robert Notman

Paperback, 170 pages

Price:	$24.95 plus shipping

Ships in 3–5 business days

The 1/4-ton, 4×4, truck of World War Two started out in the hands of the Infantry and a little company called American Bantam Car Company. Bantam worked with the Army’s Quartermaster Corps to produce the pilot model that was accepted and then fulfilled their initial contract for 70 trucks. During testing of the pilot both Ford and Willys-Overland were invited to check out this new vehicle. The vehicles were studied in great detail. Soon, at their own expense, Ford and Willys-Overland submitted pilots for testing too. This book covers the production prototypes–Bantam BRC-40, Ford GP and the Willys MA.

This book is available through major book sellers and Lulu.com.

 

More Jeep Tools and Equipment

Having the right tool for the job can be down right handy…do you have all of your vehicle tools?

a. Unless vehicle is equipped with special equipment, the following are supplied (one of each unless otherwise specified):

Thankfully you don’t have to lug around all of these tools!

Tool              Federal Stock No. Where Carried

ADAPTER, lubr. gun ………………… Tool bag
APPARATUS, decontaminating,12 qt…. Driver’s compartment
Ax, chopping, single-bit ….. 41-A-1277 Body left side
BAG, tool ……………… 41-B-15 Tool compartment
CATALOG, ord. std. nom. list.. SNL-G-503 Glove compartment
CHAINS(4) , tire, 6.00 x 16 ……. 8-C-2358 Tool compartment
CONTAINER, 5-gallon …….. ………… Bracket on rear
COVER (2), headlight ……….. ………… Under right seat
COVER, windshield ………. ………… Under right seat
CRANK, starting ………… ………… Under rear seat
EXTINGUISHER, fire ……… 58-E-202 Inside cowl, left
GAGE, tire pressure ………. 8-G-615 Tool compartment
GUN, lubr., hand-type ……. 41-G-1330-60 Tool compartment
MANUAL, technical ……… TM 9-803 Glove compartment
NOZZLE, flexible tube …………………………….
OILER, straight spout, Y2-pt.. 13-0-1530 Front of dash
PUMP, tire, w/chuck ……… 8-P-5000 Behind rear seat
RIFLE ………………… ………… On dash
SHOVEL, D-handle, rd. pt….. 41-S-3170 Body, left side
TAPE, friction, roll ………. 17-T-805 Parts bag
WIRE, iron, roll …………. 22-W-650 Parts bag

 

WW2 Jeep Tools

Do you have all of your jeep’s tools on board and ready to use?

a. Unless the vehicle is equipped with extra tool equipment, the following are supplied (one of each unless otherwise specified):

You gotta have the right tool!

Tool               Federal Stock No.    Where Carried
HAMMER, machinist’s, ball
peen, 16 oz … …. 41-H-523 Tool bag
JACK, screw type, l1 -ton,
w/handle ……………. 41-J-66 Tool compartment
PLIERS, combination, slip
joint, 6-in …………… 41-P-1650 Tool bag
PULLER, wheel hub ……… 41-P-2962-700 Tool compartment
WRENCH, drain plug …….. 41-W-1962-50 Tool bag
WRENCH, engineer’s open-end,
3/8- x 7/ 6 -in. ………….. 41-W-991 Tool bag
WRENCH, engineer’s open-end,
yz- x 1% 2-in ………….. 41-W-1003 Tool bag
WRENCH, engineer’s open-end,
%6- x ll6-in …………. 41-W-1005-5 Tool bag
WRENCH, engineer’s open-end,
/8- x 25/32 -in ………….. 41-W-1008-10 Tool bag
WRENCH, engineer’s open-end,
3/4- x 7/8-in. ………….. 41-W-1012-5 Tool bag
WRENCH, hydraulic brake,
bleeder screw …………. 41-W-1596-125 Tool bag
WRENCH, adjustable, auto
type, 11-in. ………….. 41-W-449 Tool bag
WRENCH, socket, screw fluted. 41-W-2459-500 Tool bag
WRENCH, socket, spark plug,
w/handle ……………. 41-W-3335-50 Tool bag
WRENCH, wheel bearing nut,
2/ 8 -in. hex…………… 41-W-3825-200 Tool compartment
WRENCH, wheel stud nut,
4%4 -in. hex ………….. 41-W-3837-55 Tool compartment

 

How about a complete Motor Vehicle Mechanic’s tool set?

You are certainly looking at a large task to collect 88 different tools including the toolbox.

I like to have the right tool for the right job–don’t you?

Among other things you will be looking for a saw, hammers, feelers, hammers, screwdrivers, several punches and a whole bunch of wrenches. Here is a version from my website:

And here is the list!

 

WW2 tool to make assembling the T-84 jeep transmission easy!

Tool used to assemble the cluster gear.

Those of you familiar with my earlier work will recognize the drawing above from, Military Maintenance for MB/GPW jeeps 1941-45.  It is not my intention to duplicate that work here but to bring into this discussion of transmissions those portions that may be appropriate.

While assembling the lower part of the T-84J is not impossible to do without this tool it is certainly easier.

The tool is easy to make, any machinist should be able to whip one out for you in no time. Mac McCluskey is a skilled machinist who agreed to make a copy of the above tool for our testing.

Having the right tool is a good idea–isn’t it?

Dear Editor,

We use a tool that can be made very easily and saves much time and profanity when there are 1/4-ton jeep transmissions to work on.

To line up the thrust washers on the countershaft, which must be set in the case before the clutch shaft can be installed, use a tool of the dimensions shown in the Fig. above.

The tapered end of the tool will pick up and aline the washers. It’s .OO2” smaIIer in diameter than the countershaft and slides through the clusters easily.

The countershaft is used to push the tool through. Since both tool and shaft have flat ends, the washers arc picked up smoothly by the shaft and are not bent or chipped.

T/5 Robert E. Bayes

APO 298

Ed. Note-Good idea—in fact, it’s similar to what the manufacturers use. A little grease on the washers helps to hold them in place during assembly.

You might also be interested in our book, Trouble Shooting and Repairing the T-84 Transmission. I wrote this book to make it easy for the average shade tree mechanic to work on the WW2 jeep transmission.  Why it was almost fun!

 

Do you need a place to stow the spare for your WW2 jeep?

Got a spare tire and no where to stow it?

There comes a time when your WW2 jeep is just about finished and you begin to look for the little parts to complete the project.  One of those parts is the tire carrier.  You will need to figure out which one is correct for your year model jeep.  So if you need a place to hang that spare tire…

You need to purchase a Tire Carrier. The 3-bolt late style tire carrier is the easiest to use.  It’s almost like mounting a wheel to the axle (with two less bolts, of course).

A 2 Bolt Style Tire Carrier for Willys MBs/Ford GPWs version is also available.  With this version you will also need a disc that actually holds the wheel on.

Need other parts?  The supplier has many other parts as well.

 

Using tools safely

Never use a wrench which fits the nut poorly. This practice batters nuts and spreads wrenches. Use correct size wrench.

 

 

Using a vacuum gage to diagnose WW2 jeep engine problems?

 

Army Jill pauses by the 42 Ford GPW

The vacuum gage can tell you much more then a simple compression check.

See How to Master the Vacuum Gage

You may not have a port on an early manifold. Army Motors told the troops to drill a hole or the vacuum part. And I reckon to tap it for a plug as well. As an alternative you could fashion a spacer with a vacuum port for those jeeps that don’t have a port…and when you don’t want to drill a port.